There are a great many different irrigation systems that each have different benefits and drawbacks, such as the surface irrigation techniques of border and furrow irrigation that are relatively inexpensive to install, or sprinkler and drip systems that are more water-efficient over time. Regardless of which irrigation system you chose to employ when you began your winery, they all depend on access to a reliable supply of clean water.
These systems are fed by water pipes that have been extended to reach your fields, and if the integrity of these pipes becomes compromised, the integrity of your crop is threatened. Soil intrusion into your water pipes can carry bacterial contaminants or salt to your entire crop, ruining the whole harvest.
Another consequence that is almost as bad as the spread of contagion is that a break in the water line can cause a drop in water pressure. Without sufficient water pressure, a sprinkler system cannot achieve the optimum spread required to provide moisture to all of the vines that need it.
This is not to even mention the potential costs of wasted water, or of the damage to the soil in the area where the leak occurs.
Unfortunately, when a leak occurs in the water line leading to your irrigation system, it is not often readily apparent. You could have a leak for a long time before the increased water costs and reduced efficiency of irrigation become severe enough to warn you of a problem.
For the irrigation system pipes that run below-ground, finding and repairing leaks using traditional trench repairs can be hideously expensive in the long-term. Why? Because:
Instead of making your crops wait forever to receive proper water flow again, and having to tear up your winery's ground to dig up the pipe, you could take advantage of trenchless technology to make the repair quickly and effectively.
Using a trenchless repair method, such as CIPP (cured in place pipe) or pipe-bursting, eliminates the need to dig up a large trench in the middle of the vineyard, and the amount of time spent with the water off is only a few hours as opposed to a day or more. If you use a CIPP replacement method, you can essentially replace the pipe from the inside by placing a new lining within the pipe. This new lining is designed to last for more than 50 years, and resolves cracks, root intrusion, and chemical infiltration issues that may be plaguing your pipe.
Pipe bursting, on the other hand, sends a special device called an expander head through the old pipe. The expander head shreds up the old pipe as it passes through it. A new pipe attached to the back of the expander head is dragged into place as the head moves through the old pipe. The end result is a completely new pipe to replace your old, broken, or contaminant-filled pipe.
The best part of these trenchless solutions for your vineyard is that they require only the most minimal of intrusions into your soil, instead of long, deep trenches. This saves you time spent trying to relocate sensitive grape vines, reduces the impact on your vineyard's soil, and prevents damage to your crop.
If you have questions about how trenchless technology can benefit you and your vineyard, or you need help enacting a trenchless repair solution, contact your Sacramento area experts now.