Your hot water heater thermostat regulates the temperature in the water heater. If the temperature is too low, water becomes cold before it reaches the faucet (Brrr…). If it’s set too high, cooling doesn’t occur and you risk possible burning and scalding of your skin (Ouch!).
To avoid either scenario, most thermostats have a control that allows you to set the temperature to your personal preference. To be sure your temperature is properly regulated, you should be sure to check it occasionally. It’s a DIY job that your wallet will thank you for.
Unlike repairing a water heater, adjusting it is a simple task that generally doesn’t require calling in the experts.
To make adjustments, locate the temperature control knob that is connected to the water heater heat source; you’ll typically find this on the front of the water heater, toward the bottom. Most temperature adjusters are red and easily spotted, with numbers and lines much like an oven knob.
Directly above the knob, you’ll find a small black arrow; it lines up with the marking on the control knob itself. This indicates the current temperature (depending on the make and model of the water heater, it may also be labeled cold, warm, hot, or similar). It may also have specific settings notated with different colored lines (generally white at 110 degrees and black at 120 degrees).
On some water heaters, such as low boys that may be in your closet, the thermostat may be located behind a metal panel. This can easily be unscrewed. After making the adjustment, just be sure not to screw it in too tightly, as you don't want to damage the metal.
We recommend shutting your water heater off at the circuit breaker before making any adjustments, just to be safe and avoid potential shock.
To get the temperature just right, turn the control knob counterclockwise to lower the temperature, or clockwise to increase the temperature. And never turn the control knob past the maximum temperature.
High temperatures have been known to increase the likelihood of scalding after just one second of exposure; in fact, the American Burn Association reports that over 300,000 admissions to burn centers and emergency rooms are a result of scalding.
Many manufacturers preset the water heater thermostat at or above 140 degrees Fahrenheit. However, most homes only need to be set at 120-130 degrees. At 140 degrees, scalding can occur within five seconds; however, at 130 degrees, scalding won’t happen until just under one minute—long after you or your loved ones have decided “it’s getting hot in here” and stepped out of the shower.
Plus, at 125 degrees, water is hot enough for optimum cleaning and for removing bacteria in a dishwasher. And we haven’t even mentioned the potential savings yet! Eliminating those extra pre-set degrees could lower your water bill by as much as $200 per year! Read more from Energy.gov.
Still having water heater troubles? Call the experts at Sacramento's own Express Sewer and Drain. If you’ve got problems with your water heater, we can help!